Pair of Scissors - This is used to cut papers, plastic bottles, and other materials. Glue Gun with Glue Stick This is a portable device that utilizes and dispenses hot melt adhesives. Ruler or Meterstick - This is a good tool in getting the measurement of any material used in

making a project.

White Glue - is used to fasten the sides and ends of any craft project.

Adhesive Tape - can be used to put ribbons in place or to fasten the sides and ends of gift wrappers.

Empty Cones of Thread or Boxes -They serve as the base of the item to be wrapped.

Yarns They can be used to tie a knot or ribbon designs.

Lace and Ribbons - In gift wrapping, ribbons and laces are used for tying and binding gift items and for decorative purposes.

Gift Wrapper - This is used for wrapping gift

Colored Marker Pens items - These are used for writing messages on wrapped gift items. Exterior masons - These workers usually construct exteriors of buildings and homes, walkways, casts, walls, and blocks.

Ordinary masons - These workers construct fences, walls, floors, and use different types of stones.

Rubble These are irregular-shaped, broken-sized, and textured stones.

Ashlar - These are decorative and rectangular, cuboid blocks of stones with square edges and smooth surface laid in parallel courses

Random Ashlar These are stones of varied sizes arranged in a noncontinuous manner on walls to show a formal appearance.

Bricks These are made from fireclay and secured with mortar.

Common or building bricks - known as slightly imperfect quality bricks.

Face bricks high-quality bricks used in construction of buildings and are available in different colors and finishes.

Firebricks heat-resistant bricks used in fireplaces made from fireclay and mortar.

Paving bricks - used in driveways and patios, laid on a bed of sand, gravel, or concrete.

New used bricks strong, modern bricks treated to give building structures a vintage look.

Mortar is the bonding material that holds the bricks and other masonry units together.

Concrete hollow blocks (CHBs) are widely used in the basic construction of many buildings because of its low cost and durability.

Grout This is a thin mixture of cement, sand, and water. Mason's line and line pins or blocks They are used to keep the courses in a masonry wall straight and leveled.

Soft- and hard-bristled brushes They are used to clean masonry surfaces.

Mortar box and hoe - They are used for mixing mortar.

Pointing trowel - It is used to finish and repair mortar joints.

Mortar board - It is used to hold a serve of mortar.

Jointers-They are used to shape mortar joints. Hawk - It is used to hold a small amount or mortar.

Builder's square - It is used to check that corners are true angles.

Story pole It is a measuring stick used to check the right height of each course of bricks in a wall.

Trowel - It is used to spread mortar.

Hammers They are used in bricklaying and concrete blocks construction.

Plumb rule -It is also called level.

Brick set or blocking chisel It is used to cut a very clean and sharp edge of bricks or blocks. It is also used for scoring or chiseling masonry stone.

Mason's brush - It is used for brushing off footings and cleaning the area.

Garden wall is the easiest among bricklaying projects.

A low, freestanding, single-wythe (one-brick-thick) wall, with all bricks laid end to end in the pattern.

A double-wythe wall with corners makes use of a running bond in every fifth, sixth, or seventh course, tying the two wythes together with each leg of the corner with the use of a 3/4 bat and 1/4 brick closures to fill the corner.

Wheelbarrow- It is used for mixing and hauling mortar.

Masonry construction - provides structures with strength and permanence.

Stone masonry - Stones, like granite, limestones, sandstone, marble, and slates, are used as protective and decorative coverings for building and veneering.

Reinforced masonry -It is a type of masonry, that uses other building materials to strengthen the structure with the use of steel rods and additional concrete in consonance with existing standards of building construction.

Composite masonry This type of masonry uses two units of single thickness of 4 inches (wythes) of masonry units separated by 2- to 4 1/2-inch air space but joined by noncorrodible, corrugated metal wall ties.

Prohibition signs - are a type of sign used to try and prevent various activities in certain situations.

Warning signs - alert personnel and visitors to health and safety hazards beyond those identified in the caution sign. Mandatory signs - it is a subset of the regulatory signs.

Fire signs - are used as part of fire safety signage to indicate a range of health and safety information.

One-wythe wall - It is a freestanding, straight wall with more than 8 1/2 feet high and should be at least two bricks thick. Pier-and-panel walls One-wythe panels of up to 8 feet tall are built between reinforced piers, 8 to16 feet apart.

Double-wythe wall with corners - Building a double-wythe wall with corners is fairly simple. Technical drawing is a type of mechanical drawing governed by illustrating a plan in terms of understandable symbols and measurements so that others can understand it.